XL Hot Wire CNC Machine - CNC 054


$15,400.00


SKU: CNC-054
Weight: 320.00 lbs
Footprint: 126″x76″x79″
Cutting Area: 212 Cubic Feet
Wire Length: 102″
Horizontal Travel: 60″
Vertical Travel: 60″

Quantity

XL 4-Axis Hot Wire CNC

Make tapered airplane wings, architectural shapes, letters, and much more!

The XL CNC allows high production environments to maximize output without sacrificing precision and is used in many industries including architecture, packaging, prop/set design and much more. It has high-torque motors for rapid speeds of up to 400+ inches per minute and precise control over cutting speed. The unique design has minimal moving parts for easy and ultra-quiet operation and maintenance, while providing unlimited growth potential for advanced users.

Shipping Info:

Call us for lead times and cost for crating and shipping. Shipping is NOT calculated at check out.
Toll-Free: 1-866-735-9255 / International: 1-805-735-9255

Weighs 655 lbs when crated.


For a comparison of Hot Wire CNCs, click here

To see foam projects made using this tool, click here



Includes:

  • All tools and instructions required for easy install and maintenance

  • Mach 4 and vector conversion software. Easily run it in 2-axis mode out of the box.

  • Motion Control Box

  • Keyboard, Mouse and Windows 10 PC with Pre-Installed Software

  • Power Supply

  • 100' Extra Cutting Wire

DOES NOT INCLUDE:
  • Monitor

  • (Optional) 4-Axis CAM Software

 

Features:

  • USA made and supported

  • Only 5 parts to assemble

  • Manufacturer direct pricing

  • No experience required

 


Used For:

  • Tapered airplane wings

  • Architectural pieces and trim

  • Letters and signs

 

Tech Specs:

  • 126" x 76" x 79" footprint

  • 212 cubic feet cutting area/p>

  • 102" cutting wire length

  • 60" horizontal travel and 60" vertical travel

 


Videos:







 


When you buy one of our machines, you'll be in good company.

Here's a partial list of our users:

Hot Wire Foam Factory CNC Machine Users


For an extensive list of our users, click here

Product Rating

Sign in to rate

Customer Reviews

Walt Brygier, 10-07-2016

Here's my review of your machine and your company. You can also post my phone number if you like...610-562-2278.

We were fortunate to get a prototype of the large 4-axis CNC foam cutter from Hotwire Foam Factory. We had looked at many similar machines that were priced much higher, so it was reasonable to be skeptical of the value offered by Hotwire Foam Factory. We received our machine via freight and the equipment was well packed with attention on preserving the superb craftsmanship. We chose to elevate the machine 20" off the floor on 2 CMU blocks (8" each) and a 4" pancake block on top. I had the machine uncrated; assembled according to the clear and easy instructions; leveled perfectly with an inexpensive water level; and, ready to go in a few hours. After a short acclimation to the included software, we were in production. HFF delivered a high quality CNC machine that performed exactly as advertised. But that's not the end of our story. The most impressive aspect of our business relations with Hotwire Foam Factory is the manner in which they accommodate their clients. Customer service is not the typical afterthought that you get with most companies....these folks mean it....they live it....and it's self-evident that they enjoy it.

Best,
Walt Brygier


N Hendershot - Pyramid Property Services, 03-09-2017

Excellent machine! Im so glad I purchased this unit


Jason Petersen, 07-17-2019

The XL CNC foam cutter we ordered arrived when expected and was crated extremely well. Upon opening the crate, it was immediately apparent the machine components were carefully manufactured and of high quality. The machine only required one person to assemble following the clear, quality, and thorough instructions. It was only a couple of hours after arrival that the first test parts were being cut- everything was very much plug and play. Since then we have been cutting consistent high quality 4-axis cuts without issue. Customer service has also been excellent!

Overall this machine has been fantastic and I consider it a phenomenal value. Would highly recommend!

Jason Petersen
Pyka Inc.


Jeff Mrakovich, 11-19-2019

The folks from Hot Wire Foam Factory Rock! The company I work for purchased a large cutting machine and a bow cutter and we love these products! And the customer support has been out of this world. I recommend these experts for all your foam cutting needs.


Chris Jaussi, 08-06-2021

These guys are great! We purchased the hot wire CNC machine a few years ago and it has worked flawlessly. Set up was easy and their support is fast and accurate. They have even been able to help us out in a pinch with some G-Code questions and help. I would highly recommend working with them, they are A+ for sure.


Unknown, 03-28-2024

Hi Joseph, thanks for checking in. Everything is good. Have been cutting all weekend and caught up on my orders. I like the machine, very happy with my purchase and how helpful you have been.


Testimonials