#025 - Foam Coat - All Purpose

#025 - Foam Coat - All Purpose
3 Pound Jar All Purpose Foam Coat 25 Pound Box All Purpose Foam Coat Mixing Foam Coat Gooping Foam Coat On To Create Texture 025_Before 025_After 025_Process
 
(1 reviews)  

All purpose foam coat! This rock-hard cement-like coating protects and beautifies your foam projects. Comes in a dry powder - simply mix with water. It's tough but still sandable. It is inherently fire resistant. Can be used outdoors when sealed with any outdoor paint, or mixed with Boost liquid fortifier, or Bounce liquid rubberizer. Apply thick with a trowel or thin with a paintbrush. Sets up in only about 15 minutes. Extend the drying time by adding up to 50% latex paint with your water before mixing into the dry foam coat. 3lbs covers up to 30 square feet. Dollar-for-dollar, our Foam Coat covers 4x as much as Rosco Foam Coat, is at least as strong, and has a longer shelf life. Plus it's compatible with our Boost, Bounce, and Grit!

MIXING: Mix in a clean container with clean water. Use 1 part cool water per 3 parts of powder (for example, 1 cup of water per 3 cups of powder). Add powder to water and mix until Foam Coat turns to a smooth paste. Do not overmix.
APPLYING: Fill big cracks and holes by applying pasty mixture with a trowel. You may add more water until mixture is thin enough to apply with a paint brush, although thinning weakens coating. Use thinned mixture to texture large areas. May be applied as thick as 3/8 inch. Try texturing surface before coating sets.
SET TIME: Use within 10 minutes. Sets hard in 30 minutes. Maximum bond and hardness in 24 hours.
FINISHING: Remove dust before painting. This product goes on smooth and can be sanded. Can be used outdoors if sealed with paint. Add Grit texturizer to create a rock-like surface effect.
CLEAN-UP: Clean tools and brushes with clean soapy water before coating hardens.
 

COVERAGE 3lbs:
1/64” thick 36 sq ft
1/16” thick 9 sq ft
1/4" thick 2.25 sq ft

COVERAGE 25lbs:
1/64” thick 288 sq ft
1/16” thick 72 sq ft
1/4” thick 18 sq ft

What customers are saying: "I am working on Halloween projects. This year the theme is "The Island of Dr Moreau," and I have to build an entire office and lab with and a wooden back for next year's western theme. I am using big pink insulation foam panels supported by a PVC frame. The foam coat helps with texture, stability and helps weather-proof the panels for limited outdoor use." - Kerri B., Cary, IL

WARRANTY: HWFF Inc./dba Hot Wire Foam Factory warrants this product to be of merchantable quality when used or applied in accordance with the instructions herein. The product is not warranted as suitable for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of its product (as purchased) found to be defective, or at the shipping companies’ option, to refund the purchase price. In the event of a claim under this warranty, notice must be given to The Hot Wire Foam Factory in writing. This limited warranty is issued and accepted in lieu of all other express warranties and expressly excludes liability for consequential damages. MSDS available.

 

 

 

 

Details
SKU 0251
Weight 3.25 lbs
Fortifier/additive: Not an additive
Feel: Strong/hard
Application time: 10-20 Minutes
Work time: 30 minutes; add Latex paint to extend setting time
Cure time: 12 hours
Weatherproof: Not Weather Resistant
Sandable: Sandable when dry
Paint/Stain: Can be painted but not stained
Compatible with: Grit; Mesh; Bounce; Boost; Latex Paint
 
Our price: $9.95
Options
Select quantity (by weight)
Quantity
Compare product with:
: *
: *
: *
Type the characters you see in the picture:


#K47 - Pro Model 4-In-1 Kit with Multi-Heat Pro Power Station
#050A - 4 Foot Compound Bow Cutter
#028B - Foam Fusion
#025B Boost Liquid Fortifier
#K47 - Pro Model 4-In-1 Kit with Multi-Heat Pro Power Station #050A - 4 Foot Compound Bow Cutter #028B - Foam Fusion #025B Boost Liquid Fortifier
$179.95
$229.95
$6.95
$7.95
 
#025BO Bounce Rubberizer
#024 - Styroplast
#026 - Exterior Foam Coat
#017-WT - Sculpting Tool Wire Tensioner
#025BO Bounce Rubberizer #024 - Styroplast #026 - Exterior Foam Coat #017-WT - Sculpting Tool Wire Tensioner
$6.95
$29.95
$9.95
$4.95
 
#028SG - StyroGoo
#028SG - StyroGoo
$3.50
Average customer rating:
 
(1 reviews)  



1 Most useful customer reviews (see all reviews):
John Murphy/SF3D
Oct 14, 2014
This customer purchased the item at our site.
I just did a bunch of eps carved flowers that I coated with "foam coat" from the "Hot wire Foam Factory"

I think this material is similar to the hydro-cal material. I'm not sure exactly what their recipe is. They have a fortifier additive as well as another additive that created a more flexible surface.

I found it worked quite well. I used latex paint as the liquid ingredient. The nice thing about this is that you can create a recipe that is a little stiffer or thinner as needed.

The product adhered quite well to the eps foam, and stuck well to the board we where finishing on.

The latex paint gave us a longer working time, which seemed to be around the 45 to 60 min time depending upon the mixture.

It does say that you can sand this product, but found it to be difficult to sand by hand. We did not require the finish to be sanded, so I didn't spend allot of time trying to smooth the finish in this way. They did mentions a tapping technique that worked well at leveling the product.

Correspondence with the company was very prompt and helpful. I was doing the coating on a Saturday and Sunday, and they returned my e-mails even on the weekend. Instructions for mixing and application where very straight forward, and the website offered good tips for use.
Loading...Was the above review useful to you? Yes (0) / No (0)






Type the characters you see in the picture: