#025 - Foam Coat - All Purpose (3 lbs)

#025 - Foam Coat - All Purpose (3 lbs)
025-3lb_product 025_ActionMix 025_ActionApply 025_Before 025_After 025_Process
All purpose foam coat! This rock-hard cement-like coating protects and beautifies your foam projects. Comes in a dry powder - simply mix with water. It's tough but still sandable. It is inherently fire resistant. Can be used outdoors when sealed with any outdoor paint, or mixed with Boost liquid fortifier, or Bounce liquid rubberizer. Apply thick with a trowel or thin with a paintbrush. Sets up in only about 15 minutes. Extend the drying time by adding up to 50% latex paint with your water before mixing into the dry foam coat. 3lbs covers up to 30 square feet. Dollar-for-dollar, our Foam Coat covers 4x as much as Rosco Foam Coat, is at least as strong, and has a longer shelf life. Plus it's compatible with our Boost, Bounce, and Grit!!

MIXING: Mix in a clean container with clean water. Use 1 part cool water per 3 parts of powder (for example, 1 cup of water per 3 cups of powder). Add powder to water and mix until Foam Coat turns to a smooth paste. Do not overmix.
APPLYING: Fill big cracks and holes by applying pasty mixture with a trowel. You may add more water until mixture is thin enough to apply with a paint brush, although thinning weakens coating. Use thinned mixture to texture large areas. May be applied as thick as 3/8 inch. Try texturing surface before coating sets.
SET TIME: Use within 10 minutes. Sets hard in 30 minutes. Maximum bond and hardness in 24 hours.
FINISHING: Remove dust before painting. This product goes on smooth and can be sanded. Can be used outdoors if sealed with paint. Add Grit texturizer to create a rock-like surface effect.
CLEAN-UP: Clean tools and brushes with clean soapy water before coating hardens.

 

What customers are saying: "I am working on Halloween projects. This year the theme is "The Island of Dr Moreau," and I have to build an entire office and lab with and a wooden back for next year's western theme. I am using big pink insulation foam panels supported by a PVC frame. The foam coat helps with texture, stability and helps weather-proof the panels for limited outdoor use." - Kerri B., Cary, IL

WARRANTY: HWFF Inc./dba Hot Wire Foam Factory warrants this product to be of merchantable quality when used or applied in accordance with the instructions herein. The product is not warranted as suitable for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of its product (as purchased) found to be defective, or at the shipping companies’ option, to refund the purchase price. In the event of a claim under this warranty, notice must be given to The Hot Wire Foam Factory in writing. This limited warranty is issued and accepted in lieu of all other express warranties and expressly excludes liability for consequential damages. MSDS available.

 

 

 

 

Details
SKU 025
Weight 3.25 lbs
 
Our price: $9.95
Options
Quantity
: *
: *
: *
Type the characters you see in the picture:


*
#K47 - Pro Model 4-In-1 Kit with Multi-Heat Pro Power Station
#K02B - Crafters Starter Sculpting Tool Kit
#K05 - Crafters Deluxe 3-In-1 Kit
#028B-8 - Foam Fusion (8 oz)
#K47 - Pro Model 4-In-1 Kit with Multi-Heat Pro Power Station #K02B - Crafters Starter Sculpting Tool Kit #K05 - Crafters Deluxe 3-In-1 Kit #028B-8 - Foam Fusion (8 oz)
$179.95
$29.95
$99.95
$6.95
 
#028B-16 - Foam Fusion (16 oz)
#K11 - Crafters Hot Knife Kit
#K02 - Crafters Sculpting Tool Kit
#FCSK - The Complete Foam Coat System
#028B-16 - Foam Fusion (16 oz) #K11 - Crafters Hot Knife Kit #K02 - Crafters Sculpting Tool Kit #FCSK - The Complete Foam Coat System
$11.95
$34.95
$34.95
$49.95
 
#K05MS - Crafters Deluxe 4-In-1 Kit
#K05MS - Crafters Deluxe 4-In-1 Kit
$129.95