Hot Wire Foam Factory

216 East Laurel Ave, Lompoc, California, 93436, United States     1-866-735-9255     1-805-735-9255     1-805-735-9285

Create Coat (3lbs) #027


Weight 3.00 lbs
SKU 027
Fortifier/additive: Not an additive
Feel: Ultra Smooth/Clay-like Finish
Application time: 10-20 Minutes
Work time: 1-2 hours
Cure time: 12 hours
Weatherproof: Water Proof
Sandable: Sandable when dry
Paint/Stain: Can be stained or painted
Compatible with: Acrylic paints; Stains
Our Price: $14.95


Protects and Beautifies

New, creamy-smooth white rock-hard cement-like foam finish coat. Use directly on foam. Easy to make it look just like wood, stone, metal and bone. Perfect base for creating gorgeous natural tints with acid stains or our StainFast water based stain system. Does not stick to itself nearly as well as our other coatings do. Rough sand surface between coats. Use indoors or out. Fire, rain, freeze, and sun resistant.

Coat it • Smooth it • Texture it • Sand it • Stain it • Tint it

Adds that final dazzling finish to your foam project.

MIXING: Mix 2 parts water to 5 parts powder until you have a smooth paste. Add Grit for a rough finish look and feel. Do not over-mix.
APPLYING: From 1/32 inch to 1/2 inch. Use a brush or trowel. Try texturing surface before coating sets. Use Boost fortifier if you want multiple coats.
SET TIME: Use within 30 mins. Hard in 1-2 hrs. Max strength and bond in 24 hrs.
FINISHING: Smooth or texture while drying. Sandable. Stain or paint. Add Grit for a rock-like surface.
CLEAN-UP: Clean tools etc.with soapy water before coating hardens.

1/64” thick 36 sq ft
1/16” thick 9 sq ft
1/4" thick 2.25 sq ft

WARRANTY: HWFF Inc./dba Hot Wire Foam Factory warrants this product to be of merchantable quality when used or applied in accordance with the instructions herein. The product is not warranted as suitable for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of its product (as purchased) found to be defective, or at the shipping companies’ option, to refund the purchase price. In the event of a claim under this warranty, notice must be given to The Hot Wire Foam Factory in writing. This limited warranty is issued and accepted in lieu of all other express warranties and expressly excludes liability for consequential damages. MSDS available.