Hot Wire Foam Factory
216 East Laurel Ave, Lompoc, California, 93436, United States
Grit Medium (3 lbs) #025G-60
After you add Grit to our Foam Coat, it will have the look and feel of stone, with the added benefit of strengthening the Foam Coat.
MIXING: Thoroughly mix Grit with Foam Coat to the desired grittiness. Up to 1/3rd Grit to Foam Coat will strengthen and increase coverage of Foam Coat.
APPLYING: Apply according to directions on Foam Coat.
SET TIME: Grit will not change the set or cure time for Foam Coat.
CLEAN-UP: Immediately clean tools and brushes with soapy water.
FINISHING: May be painted or stained. Cannot be easily sanded.
Use up to 1/3rd of a 3lb container of Grit with a 3lb container of our Foam Coat.
Use up to 8lbs of Grit with a 25 pound box of our Foam Coat.
WARRANTY: HWFF Inc./dba Hot Wire Foam Factory warrants this product to be of merchantable quality when used or applied in accordance with the instructions herein. The product is not warranted as suitable for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of its product (as purchased) found to be defective, or at the shipping companies’ option, to refund the purchase price. In the event of a claim under this warranty, notice must be given to The Hot Wire Foam Factory in writing. This limited warranty is issued and accepted in lieu of all other express warranties and expressly excludes liability for consequential damages. MSDS available.