Hot Wire Foam Factory

216 East Laurel Ave, Lompoc, California, 93436, United States

  sales@hwff.com     1-866-735-9255     1-805-735-9255     1-805-735-9285


Foam Coat - All Purpose #025


Details

Weight 3.25 lbs
SKU 0251
Fortifier/additive: Not an additive
Feel: Strong/hard
Application time: 10-20 Minutes
Work time: 30 minutes; add Latex paint to extend setting time
Cure time: 12 hours
Weatherproof: Not Weather Resistant
Sandable: Sandable when dry
Paint/Stain: Can be painted but not stained
Compatible with: Grit; Mesh; Bounce; Boost; Latex Paint
Our Price: $9.95

Description


All purpose foam coat! This rock-hard cement-like coating protects and beautifies your foam projects. Comes in a dry powder - simply mix with water. It's tough but still sandable. It is inherently fire resistant. Can be used outdoors when sealed with any outdoor paint, or mixed with Boost liquid fortifier, or Bounce liquid rubberizer. Apply thick with a trowel or thin with a paintbrush. Sets up in only about 15 minutes. Extend the drying time by adding up to 50% latex paint with your water before mixing into the dry foam coat. 3lbs covers up to 30 square feet.
 
Dollar-for-dollar, our Foam Coat covers 4x as much as Rosco Foam Coat, is at least as strong, and has a longer shelf life. Plus it's compatible with our Boost, Bounce, and Grit!

MIXING: Mix in a clean container with clean water. Use 1 part cool water per 3 parts of powder (for example, 1 cup of water per 3 cups of powder). Add powder to water and mix until Foam Coat turns to a smooth paste. Do not overmix.
APPLYING: Fill big cracks and holes by applying pasty mixture with a trowel. You may add more water until mixture is thin enough to apply with a paint brush, although thinning weakens coating. Use thinned mixture to texture large areas. May be applied as thick as 3/8 inch. Try texturing surface before coating sets.
SET TIME: Use within 10 minutes. Sets hard in 30 minutes. Maximum bond and hardness in 24 hours.
FINISHING: Remove dust before painting. This product goes on smooth and can be sanded. Can be used outdoors if sealed with paint. Add Grit texturizer to create a rock-like surface effect.
CLEAN-UP: Clean tools and brushes with clean soapy water before coating hardens.
 

COVERAGE 3lbs:
1/64” thick 36 sq ft
1/16” thick 9 sq ft
1/4" thick 2.25 sq ft

  • Bulk 25 lbs Foam Coat ships in a separate box from anything else that you order, so the shipping charges may be more than what you see calculated.
  • If the FedEx Shipping charges for the 25 lbs of Foam Coat alone come out to more than $14, then make a note in the "notes" box at the end of the order form saying that you prefer we ship by USPS Priority Mail (2-3 day delivery) in a Medium Flat Rate Box for $14.30. An order of 50 lbs of Foam Coat will fit in a USPS Priority Mail Large Flat Rate Box for $18.80

COVERAGE 25lbs:
1/64” thick 288 sq ft
1/16” thick 72 sq ft
1/4” thick 18 sq ft

What customers are saying: "I am working on Halloween projects. This year the theme is "The Island of Dr Moreau," and I have to build an entire office and lab with and a wooden back for next year's western theme. I am using big pink insulation foam panels supported by a PVC frame. The foam coat helps with texture, stability and helps weather-proof the panels for limited outdoor use." - Kerri B., Cary, IL
 

WARRANTY: HWFF Inc./dba Hot Wire Foam Factory warrants this product to be of merchantable quality when used or applied in accordance with the instructions herein. The product is not warranted as suitable for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of its product (as purchased) found to be defective, or at the shipping companies’ option, to refund the purchase price. In the event of a claim under this warranty, notice must be given to The Hot Wire Foam Factory in writing. This limited warranty is issued and accepted in lieu of all other express warranties and expressly excludes liability for consequential damages. MSDS available.