Coverage

MIXING: Mix in a clean container with clean water or Boost. Start with 1 part cool water or Boost per 3 parts powder (for example, 1 cup of water per 3 cups of powder). Add water to powder and mix until Create Coat turns to a smooth paste. You can add more powder or liquid until you have your ideal paste. Do not overmix.

APPLYING: From 1/32 inch to 1/2 inch. Use a brush or trowel. Use Boost fortifier if you want multiple coats.

SET TIME: Use within 20 mins. Hard in 1-2 hrs. Max strength and bond in 24 hrs.

FINISHING: Smooth or texture while drying. Difficult to sand once dry. Stain or paint.

CLEAN-UP: Clean tools and brushes with clean soapy water before coating hardens.

Click here for Foam Coat System Mixing Details and User Tips

Click here for Foam Coating and Gluing FAQs

WARRANTY: HWFF Inc./dba Hot Wire Foam Factory warrants this product to be of merchantable quality when used or applied in accordance with the instructions herein. The product is not warranted as suitable for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of its product (as purchased) found to be defective, or at the shipping companies’ option, to refund the purchase price. In the event of a claim under this warranty, notice must be given to The Hot Wire Foam Factory in writing. This limited warranty is issued and accepted in lieu of all other express warranties and expressly excludes liability for consequential damages. MSDS available.

California Proposition 65 Warning: This product contains crystalline silica, a chemical known to the State of California to cause cancer, birth defects, and reproductive harm. While mixing the dry ingredients use a dust mask or respirator with an RPE of 20 or 40. For more information, go to www.P65Warnings.ca.gov or HWFF's information page: California Proposition 65.